Table of Contents
Advertisement
possible regardless of the state or the version of the Firmware.
Bootloader V1.01
Same as Bootloader V1.00.
After the Firmware update is complete the message "press reset" will be send from the
FlashCard.
Bootloader V1.01d (only PCB V1.3d4)
Same as V1.01.
The Firmware File
The filename has the following pattern:
"Firmware Vxxx yyyymmdd Language Vxxx.fcb1"
This way it's easy to find out which firmware file you have.
The meaning of the extension fcb1 is FlashCard Board 1.
Only PCB V1.3d4
It is not possible to use firmware before 1.14 with PCB V1.3d4.
The Bootloader V1.01d will not use non-valid firmware.
Seite - 17 -
Advertisement
Table of Contents
