Trouble Shooting Guide - Sunbeam 400 Instruction And Recipe Booklet

Trouble Shooting Guide.

Problem
Food is being unevenly processed or the Oskar
moves across the work surface/benchtop.
The Oskar vibrates unnaturally or there are signs
of the Processing Blade or Slicing/Shredding Disc
hitting against either the Processing Bowl or
Cover while the Oskar is operating.
After processing, pieces of food are left on top
of the Slicing/Shredding Disc.
Cover does not move freely when attached to
the Processing Bowl.
Food falls over in the Food Tube during slicing
Solution
You are overloading the Processing Bowl. Next
time, process this amount in two or more batches.
The Processing Blade or Slicing/Shredding Disc
has not been assembled properly. Stop the
Oskar immediately and refit the cutting tool
properly.
Small pieces of food left on top of the
Slicing/Shredding Disc is a normal occurrence.
Use a small amount of vegetable oil to lubricate
the edges of the Processing Bowl and Cover.
Pack the Feed Tube snugly and apply even
pressure to the food being sliced
15