Nilfisk-Advance SC800 How-To

1
This is how the
machine should look
when you enter the
room.
4
Fill solution tank with
water (do not exceed
130 F). Add appropriate
cleaning chemical.
7
Inspect and install
brush or pad.
10
Safely transport
machine to desired
work location.
SC750/SC800 How To
Prepare for use
2
Unplug battery charger.
Wrap cord accordingly.
5
Do not mix detergent in
the tank for EcoFlex
models (fill cartridge).
8
Install brush or pad-
holder under the deck.
11
Turn on machine. Verify
there is enough battery
life to complete job.
Choose appropriate
controls for the job.
3
Inspect recovery tank
and ball float cage then
lower the lid.
6
Inspect squeegee
blade, install squeegee
on machine
(attach
recovery hose to the squeegee
inlet).
9
Install brush for
(
Cylindrical models
12
Turn on scrub switch,
lower squeegee and
begin scrubbing.
).