ReActiveMicro MicroDrive Turbo Owner's Manual page 20

Deleting Volumes from CF Card: To remove Volumes from your CF Card.
Upon booting the MicroDrive Turbo you will be taken to Volume 1
which holds the ProDOS 8 utilities. You will see a folder named
1
MICRODRIVE. Using the Arrow keys highlight the folder and press .
You will now see a file called MICRODRV.SETUP
2 Press  to execute it.
Press the letter  to select Partition Editor. You will immediately be taken to
3
the Partition Table area on the right side of the screen.
4 Use the Arrow keys to select the Volume you want to delete.
Press the letter  to delete the Volume.
5
Press the letter  twice if you DO NOT want to save your Changes and exit.
6
Repeat the above steps if you want to add more Volumes.
7 Press the letter  to select Write Configuration.
8 Press , then the letter  to save the new configuration.
✓ Done!
Setting Up a New CF Card: To use a new CF Card (or one that has been accidentally
formatted on your PC) you must first partition it.
However, if you do not have an existing bootable CF Card or a backup of the
MicroDrive Turbo Setup Utility on Floppy Disk then you will need to contact
ReActiveMicro support
Diskette with the Setup Utility.
If you have the Setup Utility, then see Adding Volumes to CF Card: above.
MicroDrive Turbo
in order to obtain a new CF Card which is preloaded, or a
13 ReActiveMicro