Setup Utility; Make A Backup Copy - ReActiveMicro MicroDrive Turbo Owner's Manual

Setup Utility

Make a Backup Copy

Before using your MicroDrive Turbo, make a backup of the MicroDrive Turbo Setup
Utility. Without this Utility you will be unable to re-setup the CF Card(s) should your
run into problems or accidentally format the original copy.
Note: It is advised to make copies of the Setup Utility (Backup floppy).
Step by Step Instructions:
Upon booting the MicroDrive Turbo you will be taken to Volume 1
1 which holds the ProDOS 8 utilities. You will see menu item named
COPYIIPLUS9.1
2 Using the Arrow keys highlight the item and press .
Press the letter  to select COPY, and the letter  for FILES.
3
Use the Arrow keys to select the Slot where you installed the
4
MicroDrive Turbo, and Drive 1. Press .
Use the Arrow keys to select the Slot and Drive where your backup
5 floppy is located. Press . You will see a folder named
MICRODRIVE.
Using the Arrow keys highlight the folder and press . You will
6
see a file called MICRODRV.SETUP
7 Using the Arrow keys highlight the file and press .
Press the letter  to start the Copy Process. This assumes your
8
Floppy Disk is preformatted with ProDOS. If not, then you can use
Copy II Plus to also format the Disk.
MicroDrive Turbo 4 ReActiveMicro