ReActiveMicro MicroDrive Turbo Owner's Manual page 18

Boot to Other Volumes: The MicroDrive Turbo comes set to boot to Volume 1 by
default. You can however temporary boot to other Volumes on the CF Card.
Hold down the  key when powering on the Apple II. This will pause the
1
MicroDrive Turbo's splash screen.
Lastly press the corresponding Volume's number key. The MicroDrive Turbo
2
will boot to that Volume. You can also use the Setup utility to make booting to
another Volume the current setting.
Upon booting the MicroDrive Turbo you will be taken to Volume 1 which holds
3
the ProDOS 8 utilities. You will see folder named MICRODRIVE.
Using the Arrow keys highlight the folder and press . You will now see a
4
file called MICRODRV.SETUP.
Press  to execute it.
5
Press the letter  to select Default Boot Volume.
6
7 Press  to change the setting to the desired NEW boot Volume.
Press the letter  to select Write Configuration.
8
9 Press , then the letter  to Save the New Configuration.
✓ Done!
MicroDrive Turbo 11 ReActiveMicro