Apple Iie Enhanced - ReActiveMicro MicroDrive Turbo Owner's Manual

Apple IIe Enhanced

When installing the MicroDrive Turbo in your Apple IIe a few things need to first be
taken into consideration.
For example, will you want to primary boot the MicroDrive Turbo, your Floppy
Drives, or other bootable devices installed in your system?
For most installations users will want to boot primary to the MicroDrive Turbo. In this
case we recommend installing the MicroDrive Turbo in Slot 7.
When you want to boot to an external floppy drive(s) simply hold down the  key
during the boot-up sequence. This allows the Apple IIe to Skip booting the
MicroDrive Turbo and move on to checking the floppy drive(s) or possible other
bootable devices in lower numbered Slots.
If, however you install the MicroDrive Turbo in another Slot then it may not boot and
depends on what other bootable devices are installed in your Apple IIe Computer.
You can however tell the Apple IIe to boot to another Slot
by breaking into BASIC if needed.
1 Hold the  key and press the  key.
Then type PR#X and press the  key, (X is the Slot number).
2
MicroDrive Turbo 7 ReActiveMicro