Alignment And Adjustment; Location Of Adjustment Button Of Remote Control - Toshiba V-632EF Service Manual

5. Alignment and Adjustment

5-1 Reference
1) X-Point (Tracking center) adjustment, "Head switching adjustment" and "NVRAM option setting" can be adjusted with remote control.
2) When replacing the Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the "Head switching adjustment" and
"NVRAM option setting".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) Remote control used for same chassis as a accessory is available for all adjustments.
5) How to adjustment.
- Press the "SW703" button on Main PCB to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- If the adjustment is completed, be sure to turn the power off.

5-1-1 Location of adjustment button of remote control

X-Point (Tracking Center)
Adjustment
NVRAM Option Setting
Head Switching Adjustment
Toshiba
MARCHE
EJECT.
DISP.
1 2 3
PROG.TV
4 5 6
8 9
7
AJUST.
SOURCE
0
IM/IM INDEX COMPT./RESTE
ENRG. AUTO.
MENU
LECT.
RET.RAP. AV.RAP.
CURSOR
RALENTI PAUSE /AR.IMAGE
ARRET
OK
STD/DBL PROG. AUDIO TV/VIDEO
IMAGE
DOUB.SON MONIT.SAT. CONT.SAT.
VT-752EF
Fig. 5-1
5-1