Toshiba V-632EF Service Manual page 47

1-2-19 Lever Unit Pinch Ass
Spring Pinch Drive Removal
1) Lift the Unit Pinch Ass'y Œ.
2) Remove the Plate Joint ´ from Lever Pinch Drive.
3) Remove the Spring Pinch Drive ˇ.
Note
:
1) Take extreme care not to touch the grease on the
Roller Pinch.
2) When reinstalling, be sure to apply grease on the
post pinch roller.
PLATE JOINT
´
SPRING PINCH DRIVE
ˇ
Fig. 4-29 Lever Unit Pinch Ass
Spring Pinch Drive Removal
Toshiba
y, Plate Joint,
'
LEVER UNIT PINCH ASS`Y
Œ
y, Plate Joint,
'
1-2-20 Lever #9 Guide Ass
1) Remove the Spring #9 Guide Œ.
2) Lift the Spring #9 Guide Ass'y ´ in the direction
of arrow "A".
Note
:
1) Take extreme care not to get grease on the tape
Guide Post.
2) After reinstalling, check the bottom side of the Post
#9 Guide to the top side of Main Base.
SPRING #9 GUIDE
Œ
Fig. 4-30 Lever #9 Guide Ass
Disassembly and Reassembly
y Removal
'
"A"
LEVER #9 GUIDE ASS`Y
´
"B"
y Removal
'
4-15