Alignment And Adjustment; Location Of Adjustment Button Of Remote Control - Toshiba VE28 Service Manual

5. Alignment and Adjustment

5-1 Reference
1) X-Point (Tracking center) adjustment, "Head switching adjustment" and "NVRAM option setting" can be adjusted with remote control.
2) When replacing the Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the "Head switching adjustment" and
"NVRAM option setting".
3) When replacing the cylinder ass'y, be sure to adjust the "X-Point" and "Head switching adjustment".
4) Remote control used for same chassis as a accessory is available for all adjustments.
5) How to adjustment.
- Press the "SW703" button on Main PCB to set the adjustment mode.
- If the corresponding adjustment button is pressed, the adjustment is performed automatically.
- If the adjustment is completed, be sure to turn the power off.

5-1-1 Location of adjustment button of remote control

X-Point (Tracking Center)
Adjustment
NVRAM Option Setting
Head Switching Adjustment
Toshiba
ON/
VTR
DISPLAY EJECT STANDBY
1 2 3
CH
4 5 6
8 9
7
TRK
I.SELECT COUNT.RST
0
F.ADV INDEX COUNT/TR CLR/RST
REC TIMER
MENU
PLAY
REW FF
CURSOR
SLOW PAUSE /STILL
STOP
OK
SP/LP AUDIO
A.DUB
VT-W58
Fig. 5-1
5-1