Important Safety Notes - WABECO D4000 Operating Instructions Manual

1.

Important safety notes

1.1 Intended use
The lathes described in these operating instructions are designed for the processing of metal, plastic
and timber only.
To ensure safe operation of the lathes, the regulations set out in the chapter: „Safety regulations" must
be observed.
1.2 Improper and incorrect use
The lathes described in these operating instructions have been developed and manufactured for the
purpose named above. Walter Blombach GmbH accepts no responsibility for property damage and
personal injury caused as a result of not intended and incorrect use of the lathes.
1.3 Modifications to the machine
For reasons of safety, it is forbidden for the user to make modifications of any type to the lathe.
Walter Blombach GmbH accepts no responsibility for property damage and personal injury caused as
a result of any modifications to the lathe by the user that have not expressly been authorized by the
company.
1.4 Safety regulations for proper use
The machine may represent a source of danger if it is not used correctly. For this reason, it is important
that the following safety regulations are read attentively and observed carefully.
Every person that operates the machine, maintains or repairs it, must have read the operating instruc-
tions, and in particular, the safety notes prior to putting the machine into operation.
In order to fulfil these requirements, these operating instructions must accompany the machine throug-
hout its entire lifetime and be available for research.
In the event that the machine changes owners, the operating instructions must thus be passed on to the
new owner along with the machine.
7