Operation; Normal Mode; Basic Display - SAFEMATIC ST-1340 Manual

3 OPERATION

3.1 Normal mode

In normal operation the control panel is at basic display mode which shows the status of the
selected channel. Press Page key to go to other display pages. Press ESC key to return to
basic display page. The display will return automatically to the basic display, if the keypad has
not been used during the past five (5) minutes.
The display changes automatically for the channel that is being pressurized or triggers an
alarm. The display will not change the channel automatically, if the keypad has been used
during the past five (5) minutes or if the center is in alarm mode.

3.1.1 Basic display

CH2 SG2 Machine 1
Interval 012h10min
L1:005bar L2:005bar
Chnl Page
Figure 3.
CH2 SG2 Machine 1
Pressuring L1 0020s
L1:105bar L2:005bar
Chnl Page
Figure 4.
Display lines
Note
The first line indicates the selected channel
•
number (CH2)
•
operation mode (SG2)
•
name (Machine 1)
The second line indicates the selected channel
•
program status (Interval, Pressuring)
•
the line number (L1) for the line in pressurization or in alarm mode
•
duration of the current phase (012h10min, 0020s)
13401BEN.doc
Extr Manu
Basic display, interval counting in progress
Ack. Manu
Basic display, pressurization in progress
The texts in brackets are sample display texts.
SAFEGREASE, SAFEOIL, MULTILUBE
ST-1340
4 (19)
27.12.2004 Rev. 1B