GABOR TM-3255 User Manual page 6

ATTACHING BRACKETS TO THE SCREEN
Determine whether screws
A, B, or C fit the threaded
holes on the back of your
screen.
Note: The screw should go in
easily with hand-turning.
If the screw slides into the
hole, or force is needed
to screw it in, select a
different size.
6 Installation Instructions
Using spacers
Two different sizes of
spacers are included with
this wall mount.
Use screws D or E and
spacers if the back panel of
your screen is recessed or
rounded, or to allow space
between the screen and the
wall for cables.
Place one or any combination
of spacers (G) or (H) between
the screen and the bracket.