Related Manuals for GABOR TTM-50
Summary of Contents for GABOR TTM-50
- Page 1 TTM-50 / UNIVERSAL SWIVEL TABLETOP TV STAND for 37 to 70 Inch Flat-Panel Screens User Manual...
-
Page 2: Safety Warnings
Thank you for choosing Gabor. The Gabor TTM-50 is a free-standing TV stand that can support up to 70-inch flat-panel TVs that weigh up to 88 pounds. The stand is height and swivel adjustable for the perfect viewing angle. Included TV brackets attach to your TV’s VESA holes for a secure hold and extra height adjustment. -
Page 3: Product Specifications
Product Specifications Compatible flat-panel display size: 37 to 70 in. (94 to 177.8 cm) Height: 20.6, 18.5, 16.6 in. (52.3, 47, 42.2 cm) Max weight capacity: 88.1 lb. (40 kg) Weight: 14.2 lb. (6.4 kg) VESA mounting pattern: 200 × 200, 300 × 200, 400 × 200, 300 × 300, 400 ×... -
Page 4: Parts List
Parts List Required tool: Phillips screwdriver... - Page 5 Preparing the Base and Riser Peel off the protective paper from the pads, and press them into place on the bottom of the base. Position each pad so it’s approximately 1–1.5 inches (2.5–3.8 mm) from each edge.
- Page 6 Assembling and Attaching the Mounting Arm...
- Page 8 Attaching a TV to the Stand Make sure the arrow on the bracket is facing up toward the top of your TV. A variety of screws are included for different VESA standards on the backs of most displays. Select the appropriate-size screws and washers.
- Page 9 Mounting a TV to the Stand It’s highly recommended to perform this step with two people. Determining which bracket hooks to use to secure your TV to the stand depends on the size of your TV and preferred height of the screen.
- Page 10 Once the TV is secured to the stand, use a Philips screwdriver to attach the safety brackets as shown in step 8. Make sure the safety brackets are screwed tightly against the bottom of the mounting arm to ensure the stability of the brackets. If desired, attach the cable organizers by pressing them into the two sets of holes on the back of the riser.
-
Page 11: Adjusting The Angle
Adjusting the Angle The mounting arm swivels 35 degrees in either direction. Turn the screen for the preferred viewing angle. Adjust the swivel tension in the mounting arm by tightening or loosening the top and bottom nuts with the included wrench. - Page 12 ONE-YEAR LIMITED WARRANTY This Gabor product is warranted to the original purchaser to be free from defects in materi- als and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely...
Need help?
Do you have a question about the TTM-50 and is the answer not in the manual?
Questions and answers