Table of Contents
Advertisement
FOR INSTALLATION
Make sure to earth.
Make sure that the condensed water from the drain hose runs out properly based on this installation
manual and insulate the drain pipe so that frost does not generate.
Install the power cable and communication cable of HR Changer at least 1m away from the electric
appliances and at least 2m away from the lightning rod.
wave.
Install HR Changer away from lighting apparatus using the ballast.
Do not install the unit in following places.
The place packed with mineral oil and the place where there are lots of moisture, or arsenic acid:
The resin parts may burn and cause the fall of the components or a refrigerant leakage.
The copper pipe or connection pipe may corrode and refrigerant may leak.
The unit may not operate normally due to malfunction in the control system.
the air:
When there is a possibility that the place in which HR Changer is installed could be the shelter of small
animals, take proper measures to prevent this situation in advance.
Please remind users of cleaning the place around HR Changer.
is responsible for the service cost.)
CAUTION
English
5
Hide quick links:
Advertisement
Table of Contents
