Specifications - Panasonic GA-AS12TPoE+ Series Installation Manual

1 Product Outline

1.2 Specifications

Interface
Switching mode
Link Aggregation
VLAN
QoS
Management method
Power supply function
Power supply method
Others
Power supply
Power consumption
Operating environment Temperature: 0–50°C, Humidity: 20–80% RH (no condensation)
Storage environment
Fan
External dimensions
Mass (Weight)
8
Twisted pair port 1–14: RJ45 connector
Transmitting and receiving network system
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
Energy Efficient Ethernet function
IEEE 802.3az (LP1)
Store and Forward method: Forwarding rate
10BASE-T:
100BASE-TX:
1000BASE-T:
MAC Address table:
Buffer:
IEEE802.3ad
Configurable up to 7 groups (Max. 8 ports per group)
IEEE802.1Q tagging VLAN protocol compatible
(Max. 256 groups including the default VLAN)
Port based VLAN, Internet Mansion function
IEEE802.1p compatible, Supports 4 priority queues
WEB control screen, ZEQUO assist Plus
Ports 1 to 12 support the IEEE802.3at compatible power supply
function.
Maximum power supply: 30 W per port, 84 W in total
Altervative A(Using idle line 1,2,3,6)
Port Monitoring, Storm control
AC 100–240V, 50/60 Hz, 1.7 A
Normally, Max. 114 W (16.7 W when not supplying power),
Min. 11.8 W
Caution: Failure to meet the above conditions may result in fire,
electric shock, breakdown, and/or malfunction.
Please take notice because such cases are not covered by
the guarantee.
Temperature: -20–70°C, Humidity: 10–90% RH (no condensation)
Installed
44 mm (Height) × 210 mm (Width) × 280 mm (Depth) (Excluding
protruding sections)
2,200 g
Max. 14,880 pps/port
Max. 148,800 pps/port
Max. 1,488,000 pps/port
Max. 8K entry/unit
512MByte