If operation is ended by setting ventilation capacity to "OFF", the unit does not respond to an external request, i.e. switches in
the bathroom / toilet / kitchen and the air quality sensor are ignored).
If power is set to "0 %", then the fans are stopped and the unit is not ventilating. In contrast to the "OFF" state, in this "0 %" mode is
still active automatic start according to external switches.
Note – if none of buttons in submenus is pushed for a long period of time, then the CPA driver automatically switches to the main
menu
2.3.2
"MODE" menu (operating mode)
Selecting a weekly program / manual mode / Party mode / Holiday mode
If more than one parameter is shown in the menu, you can switch between these by a short press; a parameter can be set by
pressing "+" and "- " repeatedly (setting can be faster if you press and hold the symbol).
2.3.3
Menu „PROGRAM" (weekly program)
Setting a weekly program (time schedule) for ventilation capacity
Setting a weekly program for starting air reheat
Changes made in a weekly program for a selected period of Mon-Sun / Mon-Fri / Sat-Sun are effected in all selected days
together, while changes made for a period of Mon / Tue / Wed / Thu / Fri / Sat / Sun are effected only for the specific selected day.
Warning:
If one or more days of the week have been set individually, parameters for these individual days will be rewritten according to
the new settings when a period of Mon-Sun / Mon-Fri / Sat-Sun is subsequently selected in adjustment mode (the pencil symbol).
5