Power Connector - HP Pavilion Gaming 15 Series Maintenance And Service Manual

Power connector

Table 6-10 Power connector description and part number
Description
Power connector for use in 200 W models
Power connector for use in 150 W models
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Disconnect the battery (see
4. Remove the display assembly (see
Remove the power connector cable:
1. Disconnect the cable from the system board (1).
2. Remove the cable from its routing path around the hard drive and fan (2).
3. Use a tool to release the connector (3), and then remove it from the computer.
Reverse this procedure to install the power connector cable.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 37).
Display assembly on page
27).
28).
49).
Component replacement procedures
Spare part number
L72704-001
L72703-001
57