Advertisement
Wiring on the Fireplace Junction Box
See manual for details on accessing the junction box.
Route the power from the heat exchanger blower to the connector on the fireplace as shown below.
NOTE: The ground wire from the blower should be connected to the ground wire from the power in.
Optional Heat
Exchanger Connection
Power Vent
Operating Instructions
Allow the fireplace to reach normal operating temperature. Then use the wall-mounted rheostat
to operate the blower speed. Turn the blower off when the fireplace is not in operation.
Maintenance Instructions
Once a year the grill should be removed and the blower area cleaned. Use a vacuum to clean
around the squirrel-cage blower, being careful not to damage any of the blades.
Page 9 of 10
DaVinci Heat Exchanger
Touch-Screen Version
Attach the ground wire from the blower to
the ground wires on the power in.
Romex Clamp
High Voltage (120vac)
Cover Plate
17601915 - 12/20/17
1/4" Nutdriver
Travis Industries, Inc.
Advertisement
