Advertisement
Duct Installation
Attach insulated duct to the connections using the included hose clamps for the inner liner and
lock-ties for the outer layer.
The flexible duct must be supported every 24" (610mm) to 36" (915mm) on horizontal sections.
Use framing/plywood or plumbing straps to support the duct. Take care to prevent damage to
the duct.
WARNING:
Do not over-tighten the hose clamps and/or lock-ties. When securing the inner layer,
take care to prevent tearing of the material.
Page 6 of 10
DaVinci Heat Exchanger
Touch-Screen Version
5/16" Nutdriver
17601915 - 12/20/17
Travis Industries, Inc.
Advertisement
