V-ZUG GK25TE Installation Instructions
Hide thumbs
Also See for GK25TE:
- Operating instructions manual (28 pages) ,
- Operating instructions manual (20 pages) ,
- Installation instructions manual (12 pages)
Advertisement
Quick Links
Installation instructions
Glass ceramic hob Toptronic
Frameless, with facets
The appliance should be installed by qualified personnel only. Each step must be carried out and checked
in full in the order specified
Validity
These installation instructions apply to the model:
Type
Modell no.
GK25TE
General notes
If installing into a combustible material, the standards for low voltage installations (NIN) and the fire pro-
tection guidelines and their provisions set down by the Swiss Association of Cantonal Fire Insurance
Companies as well as the requirements of the responsible fire authorities must be strictly observed
Identification plate
The identification plate is located next to the connection plate.
A
Affix the second identification plate (supplied) in an accessible position behind
the front of the fitted cabinet beneath the appliance.
Installation accessories included
Designation
Mounting angle right/left
Wood screws for mounting angle
Accessories
Designation
Thermal shielding plate set
Instant adhesive for installation in stone worktops
Permabond F246, incl. activator, 50 ml tube. From Silitech AG, 3008 Berne.
Adjusting brace set for special installation cases
.
005
Article no.
H62219
Diverse
Identification plate
1
J005133-R02
5.11.15
Connection plate
Article no.
H62542
B11502
H61548
.
Advertisement
Related Manuals for V-ZUG GK25TE
Summary of Contents for V-ZUG GK25TE
- Page 1 These installation instructions apply to the model: Type Modell no. GK25TE General notes If installing into a combustible material, the standards for low voltage installations (NIN) and the fire pro- tection guidelines and their provisions set down by the Swiss Association of Cantonal Fire Insurance...
- Page 2 Installation instructions J005133-R02 Glass ceramic hob Toptronic 5.11.15 Frameless, with facets Electrical connections Electrical connections must be carried out by qualified experts in accordance with the regulations for low voltage in- stallations (NIN) and the specifications of the local electricity supply companies. An all-pole mains isolating device with 3 mm contact opening should be provided in the house wiring system.
- Page 3 Installation instructions J005133-R02 Glass ceramic hob Toptronic 5.11.15 Frameless, with facets Indications • The worktop must be flat in order that it is sufficiently sealed against the ingress of liquids. • A SMS 6/6 oven can be installed directly beneath a worktop with a depth of ≥ 30 mm. Exception: M-SL. •...
- Page 4 Installation instructions J005133-R02 Glass ceramic hob Toptronic 5.11.15 Frameless, with facets Oven Type of construction: 55–762, 60–762 (excl. M-SL) ≥ 15 Cut-out in back wall if necessary ~230 600 / 550 Oven with the use of a ventilation grille (see J40254) Type of construction: 55–600;...