Video Mode; Motion Detection - Xblitz GO User Manual

Video Mode

1. Resolution
Defines the quality of video recordings. The higher the resolution the better the quality of recordings, but such files take up more space
on the memory card.
2. Loop recording
Length of the video recordings. During the recording, the selected option is symbolized by an icon, which is located on the left side of
the screen (off the menu).
3. WDR
Turning on and off the WDR function.
4. Exposure
Exposure settings.

5. Motion Detection

When you enable this option and leave the camera in standby mode, powered on, the camera will record a short (10 second) video every
time motion is detected in front of it. If you manually stop recording, the option will be automatically disabled.
6. Sound recording
Enabling and disabling audio in recordings.
7. G-SENSOR settings
Sets the sensitivity of the sensor or switches it off. When the sensor is activated at the moment of impact, the recorded file is protected
against being overwritten. We recommend setting a lower value of sensitivity: "low", otherwise the camera can capture shock at the car
bumps.
8. Date stamp
Enabling and disabling the date and time for the recording.
9. Parking Surveillance
www.xblitz.pl
MENU:
21