JUKI PLC-2700 Series Instruction Manual page 43

(3) Function setting of the knee switch
・CP-18
1 2 o P
o P T i n
i 3 1 v E
The lamps will be
on alternately.
L
i 3 1 L
o P T
E
1 2 o P
List 1
Function code Abbreviation
5 FL
31 ALFL
24 vErT
25 vSW
❶ ❷
1) Enter the function setting mode referring to "III-6. Setting of func-
tions of SC-922, 1)" in the Instruction Manual for the SC-922.
2) Press
T _
No.12 (option input/output function selection).
3) Press
_ _
4) Press
r T
5) Press
2 4
tion. Refer to list 1 for the details of the functions.
6) Press
2 4
7) Press
i n
8) Select "End" item using
n d
9) Press
T _
ting mode.
Functional item
Presser lifter switch function
Presser lifter alternate switch function Presser output will be ON or OFF each time the
Alternate vertical movement amount
conversion alternate switch function
Alternate vertical movement amount
conversion switch function
❸ ❹
switch ❶ or switch ❷ to call out function setting
switch ❸ or switch ❹ and select the item for "in".
switch ❷ and select display No.i31.
switch ❸ or switch ❹ to select the knee switch func-
switch ❷ and fix the function.
switch ❷ and end the option input.
switch ❸ or
switch ❶ or switch ❷ and return to the function set-
Presser output will be ON while the switch is
being pressed.
switch is pressed.
Alternate vertical movement amount output will
be ON or OFF each time the switch is pressed.
Alternate vertical movement amount output will
be ON while the switch is being pressed.
– 41 –
switch ❹ .
Remarks