Troubleshooting Guide - Wolf CTWH30 Use & Care Information Manual

T R O U B L E S H O OT I N G
T R O U B L E S H O OT I N G
P R O B L E M
Motor and lights
do not operate
Motor runs but lights
will not operate
Motor does not function,
but lights are operational
Excessive fan speed
and/or noise
Dimensions in parentheses are in
millimeters unless otherwise specified.
G U I D E
G U I D E
P O S S I B L E S O L U T I O N
A fuse in your home may be blown or the circuit breaker tripped.
Replace the fuse or reset the circuit breaker.
Electrical connections at the electrical box may be made
incorrectly. Contact your installer.
Halogen light bulb(s) may have burned out.
The fuse for the light bulb socket may have blown.
Switch operation may be faulty.
Connect the motor directly to a supply cord, by-passing the hood.
If the motor runs, contact a Wolf authorized service center to check
switch and control board operation.
Check to be sure that the blower wheel is not hitting the side of
the blower. Adjust if necessary.
Check and tighten blower mounting hardware if necessary.
Check for obstructions in the damper flap or duct work.
Check for excessive length of the duct run, number of transitions
and elbows and duct diameter.
13