Scanning With Carrier Sheets - Canon imageFORMULA DR-M260 User Manual

5
Fold the document in half.
Crease the document firmly down its center to fold the document
in half. Fold the document so that its edges are neatly aligned. If
the document is not folded properly, paper jams may occur or
distortions may appear in the combined scanned image.
IMPORTANT
A portion of the scanned image will be missing at the fold line.
6
Place the document with the folded edge facing right and
the top edge facing downward.
IMPORTANT
Adjust the document guides to fit the width of the document.
Otherwise, the image may scan as skewed or shifted.
Hint
• The side of the folded document facing you will become the
right side of the combined image.
• The maximum size for the combined image is A3. Use this
method to scan A3-sized documents. When scanning a folded
document of a size other than the standard formats, set [Page
Size] on the scanner driver settings screen to [Match original
size]. (See p. 47)

Scanning with Carrier Sheets

To prevent damage to a document while scanning it, insert it into an
optional carrier sheet before loading it in the scanner.
1
Opens the scanner driver's Detail Settings screen.
p. 44)
2
Open the [Feeding] tab, and set [Carrier sheet] to
[Document Type].
3
Click the [OK] button to close the settings screen.
4
Insert the document into the carrier sheet.
You can set up to three Carrier sheets at a time in the scanner.
32
(See