Chapter 4. Using the 20/40GB 4MM Internal Tape Drive
This chapter describes the operator controls and indicator lights on the 20/40GB 4MM
Internal Tape Drive. It also gives instructions for loading and unloading a tape cartridge,
and tells how to clean the tape drive.
Figure 1 shows the front view of the 20/40GB 4MM Internal Tape Drive.
1
2
Figure 1. Front View of the 20/40GB 4MM Internal Tape Drive
1
2
3
4
5
6
Operator Controls
The 20/40GB 4MM Internal Tape Drive has the following operator controls.
Unload Button
The unload button 6 enables the tape cartridge to be ejected. The unload button
operates only when the 20/40GB 4MM Internal Tape Drive's power is on. To remove a
cartridge, press and hold the unload button for about one second.
3
4
5
Tape Drive Door
Status lights
Ready (green)
Tape Motion (green)
Disturbance (amber)
Unload/Reset button
6
13