Table of Contents
Advertisement
• Occupancy view shield
Figure 2. Sensor view shield.
8
Design-in Guide - EasyAir SNS300
Sensor view shield
The sensor comes with an occupancy view shield
that can be used to block the movement detection
by the sensor in a certain area. The shield comes
inverted. (See Figure 2.) This view shield can be
pulled out, flipped and inserted back in the sensor
and then rotated so the correct area is shielded off
from the detection area. If such shield is not needed
in the application, it can be easily pulled out from
the sensor or left inverted.
April 2019
August, 2019
Advertisement
Table of Contents
