Sony DSR-80 Installation Manual page 17

OUTPUT
REF.VIDEO
VIDEO OUT
1/2 (SUPER)
COMPONENT/RGB OUT VIDEO : BNCx3
S VIDEO OUT
SDI*
QSDI* OUT
AUDIO OUT
MONITOR AUDIO
HEADPHONES
TIME CODE*
: BNCx1
NTSC 0.286 Vp-p, 75 Z, sync negative (composite sync + burst signal)
0.3 Vp-p, 75 Z, sync negative (composite sync)
PAL
: BNCx2
1.0 Vp-p, 75 Z, sync negative
Luminance : 1.0 Vp-p, 75 Z, sync negative
R-Y/B-Y : 0.7 Vp-p, 75 Z (NTSC : 75 % PAL : 100 %)
: DIN 4Px1
Y : 1.0 Vp-p, 75 Z, sync negative
C : NTSC 0.286 Vp-p (burst level), 75 Z
PAL 0.3 Vp-p (burst level), 75 Z
: BNCx2
Serial digital interface format (270 Mbps),
SMPTE 259M/ITU-R BT.656
*Using optional DSBK-100/100P (SDI output board)/DSR-60/60P
*Using optional DSBK-120/120P (SDI input/output board)/DSR-80/80P
: BNCx1
Serial digital interface (DVCAM compression signal : Video + Audio + TC signal)
*Using optional DSBK-110/110P (QSDI output board)/DSR-60/60P
: XLR 3Px4, MALE
+4 dBu, 600 Z load, balanced (low impedance)
: PHONO JACKx1
_6 dBu, 47 kZ load, unbalanced
: Stereo phone jackx1
_16 dBu (front VR max.), 8 Z load, unbalanced ø6.3
: BNCx1
2.2 Vp-p± 3.0 dB, 75 Z, unbalanced
*Using optional DSBK-130/130P (time code input/output board)
11