Advertisement
In addition to the parts included in the kit, you
may need some of the following parts depending
the type of installation:
TAC5378_LFL_VehicleInstall_Rev.indd 5
1. Wire strippers / cutters / crimpers for completing wire
connections
2. Step-down butt connectors for #14 AWG to #18 AWG.
Crimp, solder, and heat shrink style. National Standard
Parts part number ML56-16.
3. #14 AWG butt connector. Crimp, solder, and heat shrink
style. National Standard Parts part number ML5-14.
4. #18 AWG #10 stud spade terminal. National Standard
Parts part number ML216-10
5. #18 AWG #8 stud spade terminal. National Standard Parts
part number ML216-08
6. #14 AWG #10 stud spade terminal. National Standard
Parts part number ML214-10
7. #14 AWG #8 stud spade terminal. National Standard Parts
part number ML214-08
8. Butane torch or heat gun for heating solder and heat
shrink
9. #14 AWG primary wire for extended installation wire runs.
5.11 Light For Life
Hardwiring Instructions
®
5
9/3/10 10:58 AM
Advertisement
