Table of Contents
Advertisement
4.2 Technical specification
Name
Code-No.:
Material:
Temperature range:
Capacity:
Power:
Dimensions:
Weight:
We reserve the right to make technical changes!
5. Installation and operation
5.1 Safety instructions
•
Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that no
one can step on or trip over the cable.
•
The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.
•
Never place the device or other objects on the power cable.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
- 22 -
NOTE!
Improper use of the device may cause damage
to the seals.
Follow the instructions for proper usage in the
user manual.
A spare set of seals is included with the device.
In the event of a leak caused by damage to a seal,
in order to properly seal the device all seals should
be replaced with a new set of seals included with
the device.
Hot water dispenser 10l
Tank and lid: stainless steel; base: plastic
200054
30 ° C – 100 ° C
10 liters
2.5 kW / 230 V 50 Hz
Ø 213 mm, H 505 mm
2.3 kg
Advertisement
Table of Contents
