Summary of Contents for Bartscher GAHOtech soft MC-N 16
Page 1
GB/UK O P E R A T I N G M A N U A L Water softening device GAHOtech soft MC-N 16 109850 As of: January 2010 Location of installation Please read the operating manual before startup! The manufacturer is not responsible for malfunctions caused by faulty operation and failure to comply with the provisions of this documentation.
Table of contents General instructions ......................3 Transportation and packaging ....................3 Water treatment........................4 Standards, provisions and statutory regulations ..............5 1. Description of the system ....................5 1.1 System structure ......................5 1.2 Device operation ......................5 1.3 Control function ......................6 1.4 Technical description ....................
General instructions 1. The relevant installation and operation instructions contained in this manual must be read prior to the installation and operation of this device. 2. The manufacturer will not bear responsibility in case of improper use and incorrect opera- tion of the device.
Water treatment Faster washing and saving costs Scale in the devices, spots on dishes or cutlery and smudges on glass are usually due to improper water quality. Salt leaves smudges or causes scale formation. Apart from an increased amount of time it will also increase the costs of: •...
1. Description of the system 1.1 System structure Water softening device GAHOtech soft MC-N 16 Suitable for dishwashers with soft water 0 ˚dH (total hardness) or to the desired hardness level System structure: •...
Check the water hardness in the regulated soft water. 1.4 Technical description Water softening device GAHOtech soft MC-N 16 Automated, time controlled device, the pressure tank made of plastic reinforced with fibre- glass, salt tank (brine tank) made of plastic (PE) with a valve for the brine.
2. Installation preparation plan 2.1 Installation preparation plan Installation preparation plan for the purchaser On the purchaser’s side: Project: ① Utility water supply pipe (cold) 3/4” with a cut- off valve at a height of 500 mm. ② Soft water branch to the user in DN 20, 3/4” with a cut-off valve at a height of 500 mm.
3. Installation • After preparation for mounting, the device is to be placed in the designated room in accor- dance with the system structure. • All inlets and outlets are connected on the water’s side. The device connections are shown in the following figure. •...
Page 9
By the user on site Programme dial Regenerations- Time of day Regeneration time Tageszeit Programmrad zeitpunkt Regenerationsintervalle Regenerations- Regeneration frequency Regeneration dial nockenrad Actuator Aktuator • The device is factory adjusted. The fine tuning is done by the user on site. •...
5. Maintenance and service instructions • The brine tank of the water softening device must always be filled with salt tablets. There- fore it is necessary to ensure a supply of tablets. • Manual regeneration of the water softening device must be conducted periodically in order to verify control techniques.
1 Manifold 70° C 2 Control system 90° C 3 Connections set Expendable parts Salt tablets (25 kg - bag) GAHOtech soft MC-N 16 set 4 Control head (z) 5 Plastic tank + base 6 Cation resin 7 Brine tank and brine valve...
8. Product card Product card Client’s address: Number of hard 16000 water litres Total hardness Efficiency Hardness Date Salt tablets veri- Pre-filter (op- Water hardness Water hardness fied/supplemented tional) re- (utility water) (pure water) placed PAGE - 12 -...