Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
HOT SURFACE! This symbol is a warning that the device surface is hot when in use. Ignoring this warning may result in burns! HOT STEAM! This symbol indicates that during the operation the hot steam escapes from the device. Risk of scalding if safety instructions are not observed! CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device.
Page 5
• This device may only be operated in technically proper and safe condition. • Prevent access of children to the package materials like plastic bags and foamed polystyrene elements. Suffocation hazard! • Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device.
Page 6
• Check the power cord regularly for damage. Do not use the appliance if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid dangers. •...
Page 7
HOT STEAM! Risk of scalding! To avoid the hazard results please follow the safety instructions below. • Follow the maximum filling capacity! Overfilling may lead to hot water leaks and burns! • Never remove the lid during boiling! The released hot steam may cause burns of hands, arms, and face.
1.3 Proper use The operational safety of the device is assured only in case of proper use, according to the operation manual. All technical activities like installation and maintenance must be performed by the qualified service personnel only. The hot water dispenser is not designed for continuous operation in industrial applications.
2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
2.3 Declaration of conformity The device complies with the current standards and directives of the EU. We certify this in the EC declaration of conformity. If required we will be glad to send you the according declaration of conformity. 3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt.
3.3 Storage Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Packages should be stored under consideration of the following: do not store outdoors. keep it dry and dust-free. do not expose it to aggressive media. do not expose it to direct sunlight.
Control elements Heat up indicator (orange) Keep warm indicator (green) ON/OFF switch Temperature controller knob Reference mark for device adjustment “OFF” position of temperature control knob 4.2 Technical specification Description Hot water dispenser CI 10L 200072 Code no.: Material: stainless steel with fill level indicator Realization: indicator lamps: heat up, keep warm...
5. Installation and operation 5.1 Installation Positioning • Unpack the device and remove all packing material. CAUTION! Never remove the rating plate and any warning signs from the device. • Place the device on top of an even, stable, dry, and water-resistant surface which supports the weight of the device and is not heat sensitive.
5.2 Operation • before the first use wash the device according to instructions in section 6 “Cleaning and descaling”. • Pour required amount of fresh water to the device (only up to “MAX” mark). • It is important that the potable water is always present in the tank during the device operation.
Page 16
• To use hot water put appropriate container (glass, cup, mug) under the drain tap. Press the tap lever down and hold it to receive required amount of water. Then release the lever, the tap will close automatically. • Control the tank fill level with use of indicator. WARNING! Periodically check the fill level, refill with water when required.
6. Cleaning and descaling CAUTION! Disconnect the unit from the power supply (unplug!) before cleaning. Do not use a pressure washer to clean the device! Be careful and do not let the water into the unit. WARNING! Do not use any sharp or abrasive cleaning materials as they may damage the device surface.
Page 18
Descaling CAUTION! Complaints will not be taken into consideration when the device is not periodically descaled according to the instructions. Such complaints are no cases of warranty! Descale the device regularly! o Inappropriate water may lead to scale deposit in the water tank. This results in longer heating time and might damage the device.
CAUTION! For the disposal of the device please consider and act according to the national and local rules and regulations. Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany fax:...