Backlash Adj; Burning Adj - Samsung ST70 Service Manual

5-10 BackLash ADJ

■ Calibrate the error that occurs when the direction of the lens change by each camera.
<Adjustment method>
1. Save the applicable adjustment file to the microSD
2. After inserting the microSD
3. The adjustment will automatically start.
Close the body tube.
q
After moving the body tube to Tele, calculate the error of PI count after it comes to Close.
w
Repeat as many times as the count as above and obtain PI Count error sample to calculate the average.
e
Judge whether the obtained average falls within the range of Max_backLash Range.
r
Prepare the log file and move to Wide.
t
4. When the adjustment is completed, the camera will automatically be turned off.
<Adjustment result>
Open and check the CSV file generated from the adjustment memory card.

5-11 Burning ADJ

■ Repeatly operate various functions of the camera to detect sets with H/W or S/W defects.
<Adjustment method>
1. Save the Burning program to the microSD
2. After inserting the microSD
3. The camera will automatically operate in the order of the set function.
Execute the Booting operation.
q
Check the set operation cycle repetition, number of functional tests, function
w
1, function 2, ..., and execute the operation for each function.
* When the cycle of one function starts, the number of remaining cycles and completed function code are saved in
EEPROM. (This is to classify the defective operation)
EEPROM address
- Davinci_125UW : 744 burn count ) , 746( Cycle in progress )
When the Burning process is completed, the power will automatically be turned off.
e
SAMSUNG
card containing the program file, turn on the power of the camera.
TM
card.
TM
card containing the program file, turn on the power of the camera.
TM
card.
TM
Adjustment
5-11