Page 1
DIGITAL CAMERA SAMSUNG ST70/ST71 B Type : SAMSUNG TL110 SERVICE Manual DIGITAL CAMERA CONTENTS 1. Product Specification 2. Operation Instruction & Installation 3. Exploded View and Parts List 4. Firmware Update 5. Alignment 6. Block Diagram 7. PCB Diagrams 8. Schematic Diagrams 9.
1/2.3" CCD Approx. 14.2 Mega-pixel Effective Total Pixel Approx. 14.48 Mega-pixel Lens SAMSUNG Lens f = 4.9 ~ 24.5mm Focal Length (35mm film equivalent : 27 ~ 135mm) F3.5(W) ~ F5.9(T) F No. · Still Image mode :1.0X ~ 5.0X Digital Zoom ·...
Page 6
About 583 About 802 About 1765 Normal About 292 About 321 About 367 About 510 About 824 About 965 About 1993 Interface Digital output connector USB 2.0 Mono Audio Video output NTSC, PAL(user selectable) DC power input connector 20 pin SAMSUNG...
Page 7
Product Specification Power Source Rechargeable battery BP70A Dimensions (WxHxD) 96.3 × 55.8 × 16.6(16.1)mm(excluding protrusions) Weight Approx. 120 g (without battery and card) Operating Temperature 0 ~ 40°C Operating Humidity 5 ~ 85% Software Intelli-studio, Adobe Reader SAMSUNG...
The recording times can be changed by the zoom operation. � ■ The recording times can be changed by the zoom operation. Several videos were recorded in succession to determine the total � ■ Several videos were recorded in succession to determine the total recording time. recording time. SAMSUNG...
디지털 줌 배율 표시 디지털 줌 배율 표시 Digital Zoom rate Optical / Digital Zoom bar / p.29 Digital Zoom rate p.29 Digital Zoom rate p.26 p.30 SAMSUNG p.26 p.28 p.28 p.26 p.26 p.26 보 표시 ] 보 표시 ] p.44 Auto Focus Frame p.44...
Page 10
23 조리개 값 / 셔터 속도 F3.5, 1/30 p.25 23 조리개 값 / 셔터 속도 F3.5, 1/30 p.25 23 조리개 값 / 셔터 속도 F3.5, 1/30 p.25 23 조리개 값 / 셔터 속도 F3.5, 1/30 p.25 Aperture Value / Shutter Speed SAMSUNG...
Product Specification 1-4 Camera Connection Diagram microSD™ Memory Card Reader TV Monitor PC(OS: Windows)/ Lap top Computer Mac(OS 9, OS X) Fig. 1-4 Camera Connection Diagram SAMSUNG...
Self-timer / Flash / Right button Left button Battery holder Macro / Down button Battery chamber cover Memory card slot Tripod socket Ä To open the battery chamber cover, slide it in the direction shown Fig. 1-6 Bottom above. SAMSUNG...
Page 13
Product Specification Identi cation of features Back Back Camera status lamp MODE button Strap eyelet LCD monitor 5 function button MENU button Fn / Delete button Play mode button Fig. 1-7 Back SAMSUNG...
● Microsoft DirectX 9.0c or later Caution ■ It is not compatible with Windows XP and Vista 64-bit Edition. ■ Samsung is not responsible for any defects or damages caused by the use of unauthorized computer including an assembled PC. <Table 2-2 For Macintosh>...
2-2 About the software 2-2-1 Installing program Insert the installation CD in a compatible CD-ROM drive. When the setup screen is displayed, click Samsung Digital Camera Installer to start installation. Fig. 2-1 Select programs to install and follow the onscreen instructions.
Page 16
■ The camera may not be removed safely when Intelli-studio is running. End the program before disconnecting the camera. If the status lamp on your camera is blinking, wait until it stops. Click on the tool bar at the bottom right of your PC screen. Click the pop-up message. Remove the USB cable. SAMSUNG...
Are other USB cables connected to the PC? The camera may malfunction when it is connected to the PC at the same time as another USB cable. In this case, disconnect the other USB cable, and connect only one USB cable to the camera. SAMSUNG...
Page 18
The camera is connected to the USB port located on the front of the computer. When the camera is connected to the USB port located on the front of the computer, the computer may not recognise the camera. Connect the camera to the USB port located on the back of the computer. SAMSUNG...
3. Exploded View and Parts List 3-1 BODY ASSEMBLY Loc. No Parts No. Description Q ty Available Remark AD97-18531A ASSY HOLDER-STRAP SILVER AD97-18532A ASSY HOLDER-STRAP BLACK AD97-18533A ASSY HOLDER-STRAP ORANGE AD97-18534A ASSY HOLDER-STRAP BLUE 6001-002159 SCREW MACHINE 6001-002165 SCREW MACHINE 6003-002158 SCREW MACHINE SAMSUNG...
Exploded View and Parts List 3-5 TOP COVER ASSEMBLY 5-12 5-11 5-10 5-13 5-14 SAMSUNG...
Page 24
Exploded View and Parts List Loc. No Parts No. Description Q ty Available Remark AD63-04621A TOP COVER_SAMSUNG ST70 SILVER AD63-04697A TOP COVER_SAMSUNG ST70 TITAN BLACK AD63-04696A TOP COVER_SAMSUNG TL110 SILVER AD63-04699A TOP COVER_SAMSUNG TL110 TITAN BLACK AD63-04695A TOP COVER_VLUU ST70...
ORANGE AD64-02828A DECO FRONT RING BLUE AD63-05101A SHEET SPONGE- COVER FRONT 6001-001478 SCREW M1430 D2.5 (NYLOK) AD63-03529A SHEET-COVER AD97-18516A FRONT COVER ASSY SILVER AD97-18517A FRONT COVER ASSY BLACK 7-10 AD97-18518A FRONT COVER ASSY ORANGE AD97-18519A FRONT COVER ASSY BLUE SAMSUNG...
COVER BACK AD64-02806A BUTTON FUNCTION AD64-02807A BUTTON OK AD64-02348A WINDOW LED ACTION AD63-03251A T/SHEET ACTION WINDOW AD63-04767A T/SHEET- BACK BUTTON AD97-18520A BACK COVER ASSY SILVER AD97-18521A BACK COVER ASSY BLACK AD97-18522A BACK COVER ASSY ORANGE AD97-18523A BACK COVER ASSY BLUE SAMSUNG...
2. Press the WIDE button + DOWN button and then turn the POWER off. Power OFF WIDE Button + Down Button Fig. 4-2 3. Turn the power of the camera on again to check whether it has been reset. Fig. 4-3 SAMSUNG...
2. First turn off the power of the camera. 3. Press the Shutter button + DOWN button, and then turn the POWER on. Power On Shutter Button + Down Button Fig. 4-4 4. Check the version of the firmware and then turn the power off. Fig. 4-5 SAMSUNG...
3. Turn on the power of the camera. Power ON Fig. 4-6 4. The version of the FW to upgrade will be displayed on the LCD screen. When you press the SHUTTER button, the FW upgrade will start. Fig. 4-7 SAMSUNG...
Page 35
Firmware update 5. The progress of the FIRMWARE upgrade will be displayed on the LCD and the upgrade will proceed. Fig. 4-8 6. When the upgrade is completed, the camera will automatically be turned off. SAMSUNG...
2. Use the AC adaptor or fully charged batteries for the power. - You can proceed with the upgrade only when the battery level is full (Icon showing full up to 3rd level). 3. Turn on the power of the camera. Power ON Fig. 4-9 SAMSUNG...
Page 37
1) First the adjusted data will automatically be backed up in the SD card before the FULL FW upgrade. Fig. 4-11 2) Then, the FULL FW upgrade will start. (Green LED will flash) Fig. 4-12 3) When the FULL FW upgrade is complete, the camera will automatically be turned off. SAMSUNG...
Page 38
8. When the adjusted data is recovered, the unit will standby in Power OFF condition. (Press the POWER button turn off the power.) Fig. 4-14 9. Check whether the adjusted data is recovered from the screen to check the firmware version. (Each item – OK) Fig. 4-15 SAMSUNG...
- Infinity Callimator for PUNT adjustment - Gray chart (18%) for FLASH & AWB, DARK BOX) - POWER SUPPLY: 4.2V/2A 3. Adjustment program file Save and use the program for each adjustment item on the microSD card to adjust each item. The file name for each adjustment item is the same as “ST70_ADJ.TXT”, “ST71_ADJ.TXT”. SAMSUNG...
Page 40
Save adjustment value to EEPROM EEPROM (If necessary) Display adjusted value and whether Display adjusted value and whether it is OK (LCD) it is OK (LCD) Set process ID (EEPROM) Auto Power Off or continue with process Power Off or stand by SAMSUNG...
Change the ISO and repeat the process from 4 to 6. u 4. When the adjustment is completed, the camera will automatically be turned off. <Adjustment result> Open and check the CSV file created in the adjustment memory card. SAMSUNG...
6. When the adjustment is completed, the camera will automatically be turned off. <Adjustment result> Open and check the CSV file generated from the adjustment memory card. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record SAMSUNG...
5. When the adjustment is completed, the camera will automatically be turned off. <Adjustment result> Open and check the CSV file generated from the adjustment memory card. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record SAMSUNG...
Refer to the CARD WRITE INFORMATION to write the adjustment result to the data file. Set the lower and upper specification. 6. When the adjustment is completed, the camera will automatically be turned off. <Adjustment result> Open and check the CSV file generated from the adjustment memory card. SAMSUNG...
Record the R and B gain to EEPROM during flash process and R, B gain success. <Adjustment result> Open and check the CSV file generated from the adjustment memory card. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record SAMSUNG...
- Maintain distance of less than 1cm between the end of the camera body tube to the lens surface of the Infinity Callimator. - The camera must be fixed while the adjustment is made. Infinity Callimator Camera Tripod Fig. 5-5 2) Used specification for infinite object - The camera must be fixed with a tripod and leveled condition must be maintained. - Set up the camera toward a building or object in infinite distance (more than 500m). (Do not use the chart) - Set a cathedral, partment or object with high contrast in day environment/AF area display. SAMSUNG...
Page 47
For the adjustment in these environments, AF may not be accurate when shooting Tele or Macro. 3. Turn on the power of the camera. 4. The adjustment will automatically start. <Adjustment result> Open and check the CSV file generated from the adjustment memory card. SAMSUNG...
Refer to the CARD WRITE information to write the number of defective cells to the data file. 4. When the adjustment is completed, the camera will automatically be turned off. <Adjustment result> Open and check the CSV file generated from the adjustment memory card. 5-10 SAMSUNG...
* When the cycle of one function starts, the number of remaining cycles and completed function code are saved in EEPROM. (This is to classify the defective operation) EEPROM address - Davinci_125UW : 744 burn count ) , 746( Cycle in progress ) When the Burning process is completed, the power will automatically be turned off. SAMSUNG 5-11...
5. Once the adjustment is completed, the camera is automatically off. <Adjustment result> Open a CSV file created on the adjustment memory card to check the result. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record 5-12 SAMSUNG...
3. Adjustment is made automatically. OIS module will be operated left/right/up/down 2-3 times. 4. When the adjustment is completed, the camera will be off automatically. <Adjustment result> Open the CSV file created on the adjustment memory card to check the result. SAMSUNG 5-13...
Then, S/N writing process will be done, automatically, after disconnected USB cable. S/N writing script file has de- leted automatically, after finished the S/N writing process same with RTC test script. <Process result> When checking the version (Press SHUTTER Button + Zoom Button to turn on), S/N appears on the screen. 5-14 SAMSUNG...
Do the repair work in a dust free environment. Always use the anti-static mat and wrist band, as the parts can be damaged from static electricity PCB Type from the hand. Be careful of damage of deformation of parts from the pin set. CONTACT Type SAMSUNG...
Page 72
Disassembly and Reassembly Disassembly image Disassembly description Remove 3 Screws. Remove Side Cover. Remove 2 Screws. SAMSUNG...
Page 73
Disassembly and Reassembly Disassembly image Disassembly description Remove 4 Screws. Remove Back Cover Assy. Remove Front Cover Assy. SAMSUNG...
Page 79
Disassembly and Reassembly Disassembly image Disassembly description Remove 3 Screws from Lens Base Assy. Remove Lens Base Assy. Remove 1 Screw. SAMSUNG...
Page 80
Disassembly description Remove Main FPCB Assy and Zoom Motor Assy. Separate the 3rd sub barrel assembly while slightly moving to the arrow direction as shown in the figure. Remove 3rd Sub Barrel Assy. caution The spring can be separated. 9-10 SAMSUNG...
Page 81
Disassembly and Reassembly Disassembly image Disassembly description Remove Shutter FPCB Holder and Idle Gear. Remove Idle Gear. Separate the outer guide barrel by slightly rotating the cam barrel in the counter-clockwise direction as shown in the figure. SAMSUNG 9-11...
Perform the assembling work by matching the zoom sub barrel assembly and 2nd sub barrel assembly as shown in the figure. This is the assembled state of the zoom sub barrel assembly. Assemble to the guide plate barrel by matching as shown in the figure. 9-16 SAMSUNG...
Page 87
This is the assembled state of the guide plate barrel. While assembling the point “a” in advance by matching as shown in the figure, perform the assembly of “b, c”. This is the assembled state of the Inner cam barrel. SAMSUNG 9-17...
Page 88
Be careful about the location of the shutter PCB. Assemble the cam barrel as shown in the figure. caution Be careful about the location of “a.” This is the assembled state of the cam barrel assembly. 9-18 SAMSUNG...
Page 89
Assemble to the “b” of the outer guide barrel by matching the point “a” as shown in the figure. This is the assembled state of the outer guide barrel. Assemble the FPCB holder and idle gear as shown in the figure. SAMSUNG 9-19...
Page 90
Assemble the 3rd sub barrel assembly with spring to the lens base as shown in the figure. This is the assembled state of the 3rd sub barrel assembly. Assemble the main FPCB assembly as shown in the figure. 9-20 SAMSUNG...
Page 91
Assemble the lens base assembly by matching the AF motor “a” to the location of “b”. After repeated test of the zoom up to the TELE, assemble the zoom motor assembly and the connector of the shutter FPCB. SAMSUNG 9-21...
Page 92
Disassembly and Reassembly Assembly image Assembly description This is the assembled state of the barrel assembly. 9-22 SAMSUNG...