V2
Vestalux
LS9016
Facade Outliner
READ ALL SAFETY INSTRUCTIONS FIRST
› Follow instructions carefully, failure to do so will void
warranty.
› Ensure installation complies with local law and
applicable standards.
› Input voltage is 30-48 V DC
› Only use Lumascape power supply, control
equipment and leader cables.
LUMASCAPE ASIA PACIFIC Brisbane Technology Park, 18 Brandl Street, Eight Mile Plains, QLD 4113, Australia
Phone +61 7 3854 5000 | Fax +61 7 3854 5001 | Email: sales@lumascape.com.au |
LUMASCAPE NORTH AMERICA 1300 Industrial Road, Unit #19, San Carlos, CA 94070, USA
Phone +1 650 595 5862 | Fax +1 650 595 5820 | Email: info@lumascape.com |
Products and specifications are subject to change without notice.
INSTALLATION INSTRUCTIONS
LS9016
DIRECT VIEW
FACADE OUTLINER
› Ensure mains input power is surge protected.
› Never make connections whilst the power is
connected.
› Do not make modifications or alter the product.
› Keep luminaire and connections clean and free of
debris.
www.lumacape.com
www.lumacape.com
USA I Australia I Asia I Middle East I Europe
IN0184 190311
1 / 8
Need help?
Do you have a question about the Vestalux V2 LS9016 and is the answer not in the manual?
Questions and answers