D
Tire change calibration
The tire change calibration function will
be used when replacing the tires. This
function will adjust the mis−calculation
caused by the circumference differ-
ence between the old tires and new one-
s. If this procedure is not performed
when tires are replaced, the current ve-
hicle position mark may be incorrectly
displayed.
To perform a distance calibration proce-
dure, touch the
"Tire Change"
on the "Calibration" screen.
The message appears and the quick dis-
tance calibration is automatically started.
A few seconds later, a map screen will be
displayed.
ADVANCED FUNCTIONS
Distance unit
08SC01
switch
"MENU"
1. Push the
3U406
"Setup"
2. Touch the
"km"
3. Touch the
of "Distance" to choose the distance
unit.
The selected switch is highlighted in
green.
"OK"
4. Touch the
button.
switch.
"miles"
or
switch
switch.
121