Janome MS 2028 Instruction Book page 18

Stitch Selector (how to select stitches)
Raise the needle to the highest position, and select a
pattern by lurning the stitch selector.
The red mark \lvill be shown on the selected stitch.
(Set the stitch length control at S.S. when using the
stretch stitch.)
* Window O shows stitch number, foot number and
stitch,
* Window @ shows the desired stitch length for lhe
selected stitch.
* Window O shows lhe desired stitch width Jor the
selected stitch.
Stitch patterns are color-coded to a recommended
setting zone at the stitch length control
ZONES:
Red: Straight, zigzag and utility stitches
Green: Geometric decorative stitches
Blue: Built-inbuttonhole
Gold: Stretch stitches
@ Stitch selector
O Red mark
1 _ O = l = 2 _ 3 _ 4
2 3 4 5 6 7 3 9 t 0 l l r 2 t 3 1 4
Il''iFEiilIllit
t{$tE$h$F}}t