Preparations At The Workplace - Hilti BX 3 Operating Instructions Manual

Contact pressure
Application temperature (ambient temperature)
Recommended maximum fastening rate
Rated voltage
4.1 Battery
Battery operating voltage
Ambient temperature
Storage temperature
5

Preparations at the workplace

CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1 Inserting the battery
In order to achieve maximum battery lifetime, replace the discharged battery with a fully charged
battery as soon as you notice a clear drop in battery performance.
1. Check that the contacts on the battery and on the tool are free from foreign objects.
2. Fit the battery and make sure that it is heard to engage.
◁ Once the battery has been fitted, the charge status LEDs light for a short time.
CAUTION
A falling battery presents a hazard. If the battery is not secured correctly it may drop out and fall while the
work is in progress.
▶ Always check that the battery is securely seated.
3. Check that the battery is securely seated in the fastening tool.
Printed: 19.07.2018 | Doc-Nr: PUB / 5376261 / 000 / 01
BX 3
11 lb ...16 lb
f f
(50 N ...70 N)
5 ℉ ...122 ℉
(−15 ℃ ...50 ℃)
650/h
21.6 V
BX 3-L
11 lb ...16 lb
f f
(50 N ...70 N)
5 ℉ ...122 ℉
(−15 ℃ ...50 ℃)
650/h
21.6 V
21.6 V
14 ℉ ...140 ℉
(−10 ℃ ...60 ℃)
−4 ℉ ...104 ℉
(−20 ℃ ...40 ℃)
English 9