Taking Care Of Your Machine - Vax Compact Power VX97 User Manual

Maintaining the carpet washer
WARNING: Always switch off the carpet washer and unplug from the charger and mains before carrying out any
maintenance or troubleshooting.
Emptying and cleaning the dirty water tank
IMPORTANT: Empty and rinse out clean and dirty water tanks and leave to air dry before replacing. Do not leave solution
stored in the tanks between uses.
Depress the dirty water
tank release latch and lift
to remove the dirty water
tank from the carpet
washer.
Cleaning the filter
Depress the dirty water
tank release latch and lift
to remove the dirty water
tank from the carpet
washer.
Hold the dirty water tank
over a sink and pull to
open the quick pour spout.
Wipe the filter located on
the machine underneath
the dirty water tank to
clear any dirt/debris.

Taking care of your machine

Empty the dirty water over
the sink. Rinse the dirty
water tank under water
(max 40°C) to remove
dirt/debris.
To re-fit, tilt the dirty water
tank and line the back of
the tank up onto the carpet
washer. Drop the front of
the tank forward until the
dirty water tank release clip
clicks into place.
To re-fit, tilt the dirty water
tank and line the back of
the tank up onto the carpet
washer. Drop the front of
the tank forward until the
dirty water tank release clip
clicks into place.
9