Vax Compact Power VX97 User Manual page 3

• Don't carry the carpet washer whilst it's switched on.
• Don't attempt to remove blockages with sharp objects as this may cause
damage to your carpet washer.
• Don't use the carpet washer with incorrect voltage as this may result in
damage or injury to the user. The correct voltage is listed on the ratings label.
Do's
• Always vacuum your carpets thoroughly before using the carpet washer.
• Check with the manufacturer of your flooring prior to using the carpet washer.
Test all carpets and rugs for colourfastness and pile distortion before full
usage. Run the carpet washer over a small hidden area. If no damage or pile
distortion occurs continue cleaning.
• Always turn off or unplug the carpet washer from the mains before carrying
out any maintenance.
• Turn off all controls on the carpet washer before disconnecting or connecting
the power cord. After use always wrap the power cord around the cord clips
provided.
• Always keep the power cord away from the brushes whilst using the carpet
washer.
• Always protect the power cable from heated surfaces and open flames.
• Use only CE approved 13amp extension cords, non-approved extension cords
may overheat. Care should be taken to arrange the extension cord as it can be
a trip hazard.
• Always use the carpet washer with all water/solution tanks and filters in place.
• Keep all openings clear and free from debris as this may affect the airflow/
suction.
• Always use the carpet washer in an upright position. To prevent motor
damage from dirty water, never hold the carpet washer upside down or on its
side.
• Store the carpet washer in a cool, dry area. Before storing the carpet washer
ensure all water/solutions tanks and filters are thoroughly clean and dry.
PLEASE KEEP INSTRUCTIONS FOR FURTHER USE AND USE ONLY
AS INSTRUCTED IN THIS GUIDE.
3