Page 1
NT 501 2002018 NT 502 2002028 NT 621 2002088 NT 622 2002095 NT 622VS 2002094 NT 901 2002101 NT 921 2002121 Original-Gebrauchsanleitung V3/0718...
Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. NOTE! This symbol highlights recommendations and information aimed for effective and trouble-free device operation. 1.2 Important safety instructions The device is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or...
Page 5
Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty expires. To prevent hazards and to ensure optimum efficiency, no modifications or alterations to the device that are not explicitly approved by the manufacturer may be undertaken.
Page 6
In any case do not open the device housing. In case of electrical or mechanical modifications the electric shock hazard will occur. Do not use any acid agents and make sure no water ingresses the device. Never operate the device with moist hands or standing on wet floor.
Never use the device near flammable materials, such as alcohol, spirits, or petrol. High temperature may cause their evaporation and due to contact with the ignition sources the deflagration may occur, and in result the injuries and damages. In case of fire before the fire extinguishing activities remove the plug from the socket or disconnect the device from the power supply.
2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
fire proof chamotte plate Name Pizza Oven 2002018 2002028 Code-no.: NT 501 NT 502 Model: Temperature: from 85 °C to 450 °C Power: 4 kW / 400 V 50/60 Hz 2 NAC 6 kW / 400 V 50/60 Hz 3 NAC...
Page 11
Name Pizza Oven 2002094 Code-no.: NT 622VS** Model: Temperature: from 85 °C to 450 °C Power: 10 kW / 400 V 50/60 Hz 3 NAC Device dimensions: W 930 x D 835 x H 730 mm Baking chamber each W 620 x D 620 x H 140 mm dimensions: Load: 2 x 4 pizzas Ø...
4.2 Overview of parts Housing Internal lighting Ventilation ducts Control panel Glass pane door Door handle Chamotte plate Baking chamber - 33 -...
Page 13
Additional accessories (not included in the delivery) Base Unit NT501N designed for: NT 501 / 2002018 NT 502 / 2002028 chrome-nickel steel W 760 x D 610 x H 900 mm weight: 14.6 kg Code-no. 200316 Base Unit NT601N designed for:...
5. Installation and operation 5.1 Instructions for the installer CAUTION! The installation and maintenance work related to the device may be performed only by the qualified and authorized technician, in accordance with international, national and location regulations. 5.1.1 Installation instructions ...
5.1.2 Setting up Unpack the device and remove the packaging. Remove the protective foil from the device before its first use. Make sure that it has been completely removed. Remove transportation safeguards from the baking chamber. CAUTION! Never remove the rating plate or warning labels from the device. ...
5.1.3 Electrical connection DANGER! Risk of electrical shock! The device may cause injuries if installed improperly! Before installation the local power grid specification should be compared with that of the device (see rating plate). Connect the device only in case of full compliance! ...
5.2 User instructions CAUTION! Read carefully these operating instructions, because they include important instructions regarding safety and operation of the pizza oven. The device is intended for professional use and may be operated by the trained kitchen personnel only. 5.2.1 Safety instructions ...
5.2.3 Control panel 2002018 2002088 / 2002095 / 2002094 / 2002101 / 2002121 A „0“ position indicator A „0“ position indicator B Upper heating element control light B Upper heating element control light C Temperature regulator, upper C Temperature regulator, upper heating element heating element D „0“...
Page 19
2002028 A „0“ position indicator B Upper heating element control light C Temperature regulator, upper heating element D „0“ position indicator E Middle heating element control light F Temperature regulator, middle heating element G „0“ position indicator H Lower heating element control light I Temperature regulator, lower heating element J Internal lighting switch –...
5.2.4 Temperature regulation NOTE! Before baking the pizza, the oven should be pre-heated to the desired temperature! Connect the device to the power supply. Set the desired temperature for the selected upper/lower heating element using the appropriate temperature regulators. The temperature of the pizza oven can be adjusted within the range from 85 °C to 450 °C.
6. Cleaning WARNING! Disconnect the device from the power supply before cleaning. Let the device cool down. Never clean the device with use of water jet! Be careful and do not let the water into the device. o Regularly clean the device while taking special care in case of elements which come into contact with food products.
7. Possible Malfunctions In case of any malfunction, disconnect the device from the power supply. Based on the table below, check whether it is possible to remove defects without notifying a customer service point or contacting the sales agent. PROBLEM CAUSE SOLUTION ...
Electric devices should be used and disposed of properly to prevent the impact on the environment. Disconnect the device from the power supply and remove the power cord from the device. Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax: +49 5258 971-120...