Prepare Hinge-Foot Assembly for Attachment to Maestro
Rotate Hinge "A" and "B" tabs up to vertical position as shown below in preparation for installing each
foot on the Maestro.
Attach Hinge-Foot Assembly to Maestro
Position the right hinge-foot assembly "A" on the right side back of Maestro as shown below. Using a #2
screwdriver, attach with two M4 screws. Tighten snugly, but do not overtighten. Repeat the procedure
for attaching the left hinge-foot assembly "B" on the left side back.
Page 8
© 2016 FlexRadio Systems, v1.0.1