Table of Contents
Advertisement
Verify the Correct Orientation of the Hinges
There is a left and right hinge designated as "A and "B" which is stamped on the underside of each hinge
as shown below. The "B" hinge will be installed on the left foot and the "A" hinge will be installed on the
right foot. Please note that each hinge consists of a narrow and wide tab. The narrow tab, shown as the
one at the bottom is the part of the hinge that will be attached to the foot in the next installation step.
Attach Hinges to Feet
Flip the left or "B" hinge over and attach it to the foot with two (2) M4 attachment screws using a #2
screwdriver. Tighten snugly, but do not overtighten. Repeat the procedure for the right or "A" hinge as
shown below.
Page 7
© 2016 FlexRadio Systems, v1.0.1
Advertisement
Table of Contents
