Epson M2140 User Manual page 116

5. Select Head Cleaning and press the OK button.
6. Press the start button to clean the print head. You see a message on the LCD screen during the
cleaning cycle.
Caution: Never turn off the product or open the printer cover during a cleaning cycle or you may not
be able to print.
When the cleaning cycle is finished, you see a message on the LCD screen.
7. Select Nozzle Check, press the OK button, and press the
confirm that the print head is clean.
If you don't see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 6 hours. Then try cleaning the print head again. If quality still does not improve, run a Power
Cleaning. If there is still no improvement, contact Epson support.
Parent topic: Print Head Cleaning
Related concepts
Power Cleaning
Related references
Where to Get Help
Related tasks
Loading Paper in the Cassette
Checking the Nozzles Using the Product Control Panel
start button to run a nozzle check and
116