Safety Instructions - dehn HVI Conductor Installation Instructions Manual

1.

Safety instructions

IEC 60417-6182:
Installation,
electrotechnical expertise
Only qualified and trained lightning protection specialists are allowed to install the air-termination

masts.
 The air-termination masts may only be installed under the conditions shown and referred to in these
installation instructions.
Prior to installation, the air-termination masts must be examined for good order and condition. If

damage or any other defect is found, they must not be installed.
 For safety reasons, installation work must be stopped as soon as a thunderstorm approaches/is
noticed.
 The installation of components from other manufacturers or of other types is impermissible and will
void warranty.
 When installing the air-termination masts on sensitive surfaces such as roof sheetings, it must be
ensured that these surfaces are not damaged.
When installing the air-termination masts in conjunction with the relevant HVI Conductors, the

installation notes of the relevant installation instructions must be observed:
HVI power, HVI
 ®
HVI Conductor (pre-assembled), HVI

®
These installation instructions can be downloaded at www.dehn-international.com/Products/HVI
Lightning Protection or can be found using the product search (enter Part No.  more detailed
information).
For application-specific questions, please contact the relevant sales team or the DEHN representative

in your country.
Observe installation instructions!
IEC 60417-6183:
Installation,
mechanical expertise
power long, publication No. 1829
®
long, publication No. 1841
®
3
Publication No. 1565 / UPDATE 04.18