CUMMINS ALLISON Universal JetScan User Manual page 22

Condition
Universal JetScan sensors have
detected a possible counterfeit
note. The machine has stopped
with this note as the top note in
the pocket indicated on the
screen. This note has not been
included in the count.
S1 S2 S4 S6 S7
Commonly identifies
poor-quality counterfeit notes.
Inspect the top note in the pocket indicated on the screen.
If it is identified as a counterfeit, place it aside and press CONT. It will not be
part of the count.
If the note is determined to be good, return it to the pocket indicated on the
screen and press the appropriate denomination value key. Universal
JetScan will re-start, and this note will be added to the count.
The note also may be reprocessed. Return the note to the hopper and press
CONT.
Code
S1
S2
S4
S6
S7**
S10*
S12*
* These error codes are most common among super notes.
Notes producing these codes should be carefully examined.
** This code only appears on past models equipped with a
thread sensor.
© 2014 Cummins-Allison Corp.
Action
Possible Causes
• Incorrect note paper
• Soiled note
• Incorrect note paper
• Machine-washed note
• Taped note
• Incorrect-ink error
• Worn note
• Incorrect-ink error
• Thread error
• Incorrect-ink error
• Worn note
• Incorrect-ink error
• Worn note
Greater probability of a
high-quality counterfeit.
This line could show
different suspect-document
codes. For details, refer
to the code chart below.
S10 S12
21