Accessories - IKA Roller 6 basic Manual

Operating modes A and B
Operating mode A
The device does not restart automatically when power is resto-
red after a power outage.
Operating mode B
The device restarts automatically when power is restored after a
power outage, using the set values, and displays the (Pr) symbol
to indicate that there has been a power outage within a certain
period of time.
Switching between operating modes
To switch between operating modes, switch the device off, then
keep the "Start/Stop" button (F) depressed and press the "Pow-
er" button (L).
Removal / fitting tube fences
The front and back tube fences must be in position when the
device is in operation.
The side tube fences are optional; for certain sizes of tubes the
side tube fences offer additional safety.
Fitting
• Plug in the tube fences (1).
Removal
• Take the tube fences off (1).
Fitting / removing the rollers
Removal
• Take the tube fences off (1).
• Release the roller and pull it out (2).
• Remove the roller completely (3).
Fitting
• Fitting is the reverse of removal.
A "click" confirms achievement of the correct position.
14
Designation
Plate
SH
Caution! Do not change the tube fences or
rollers whilst the device is in operation!
Stop the device by pressing the "Start/Stop"
button (F). Do not use your hand to stop the
device.
Press the "Power" button (L) to switch the
device off.
1

Accessories

Description
For certain sizes of tubes the side tube fences offer
additional safety, so that the tubes cannot fall off
the shaker.
1
2
3