Operation - Cata MD7010BK Instruction Manual

OPERATION

Before using the oven for the first time

Remove packaging, clean the interior of
the oven and the hob.

Take out and wash the oven fittings with
warm water and a little washing–up liq-
uid.

Switch on the ventillation in the room or
open a window.

Heat the oven (to a temperature of 250°C,
for approx. 30 min.), remove any stains
and wash carefully; the heating zones
of the hob should be heated for around
4 min. without a pan.
The oven is equipped with a retractable
knobs. In order to select a function do the
following:
1. Gently press and release a knob which
will pop out,
2. Turn the oven functions selection knob to
the desired function.
Symbols printed around the knob indicate
available oven functions.
1
2
Important!
In ovens equipped with the electronic
programmer Ts, the time "0.00" will
start flashing in the display field upon
connection to the power supply.
The programmer should be set with
the current time. (See Electronic
programmer ). If the current time
is not set operation of the oven is
impossible.
The electronic prgrammer Ts is equipped
with electronic sensors which are
switched on by touching or pressing
the sensor surface for at least one
second.
Each sensor reaction is confirmed by
the beep.Keep the sensor surface clean
at all times.
Important!
The inside of the oven should only be
washed with warm water and a small
amount of washing–up liquid.
40