Table of Contents
Advertisement
Using your
Ceramic Hob
TO START COOKING
After powering on, the buzzer beeps once, all the indicators light up for 1 second then go out,
indicating that the ceramic hob has entered the state of standby mode.
1. Touch the ON/OFF control. all the indicators show "-"
2. Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
3. Select a heat setting by touching the "-" or "+" control.
WHEN YOU HAVE FINISHED COOKING
1a. Turn the cooking zone off by scrolling down to"0" or touching "-" and "+"
control together. Make sure the display shows"0"
1b. Turn the whole cooktop off by touching the ON/OFF control.
• If you don't choose a heat setting within 1 minute, the ceramic
hob will automatically switch off. You will need to start again
at step 1.
• You can modify the heat setting at any time during cooking.
10
Advertisement
Table of Contents
