Table of Contents
Advertisement
TouchPad assembly
Description
TouchPad assembly
TouchPad assembly cable (included in Cable Kit)
Before removing the TouchPad assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Place the computer in "Battery Safe mode"
3.
Disconnect all external devices connected to the computer.
4.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
5.
Remove the following components:
a.
Service doors
b.
Keyboard
c.
Top cover
Remove the TouchPad assembly:
1.
Position the top cover upside-down.
2.
Disconnect the cable from the ZIF connector on the TouchPad (1).
3.
Lift the cable to remove it from the adhesive that secures it to the top cover (2).
4.
Remove the 6 broad head Phillips M2.0×2.0 screws (3) that secure the TouchPad to the top cover.
46
Chapter 6 Removal and replacement procedures for authorized service provider parts
(Service doors on page
(Keyboard on page
33)
(Top cover on page
37)
(Battery Safe mode on page
26).
Spare part number
L01056-001
L01047-001
25).
Advertisement
Table of Contents
